-
Comfort
The indoor temperature should be adjusted to the target temperature as soon as possible. If the ventilation is bad, fresh air function should be added. The fresh air should also be adjusted to make it cleaner and close to the indoor temperature, thus could achieve the best customer experience as well as increase the working efficiency.
-
Independent systems
The electricity consumption of each company should be calculated independently. Moreover, the air conditioning system of each office should also be independent, then the failure of single system would not impact other system working.
-
Energy saving
In summer and winter the machine may run for very long time per day, so the energy saving ability of the machine should be fully considered. In order to reduce the running cost maximally, the machine with high energy saving ability such as direct evaporative air conditioner could be considered.
Design Points
Solutions
Equipment:
Direct Evaporative Air Conditioner
Fresh Air Ventilation Duct Air Conditioner
Features:
The heating and cooling efficiency of direct evaporative air conditioner are higher than common air conditioners
The energy consumption of the direct evaporative air conditioner is 40 percent lower than air cooled air conditioner and 15 percent lower than water cooled air conditioners, which achieves lower running cost.
Each room has an independent control module for electricity metering without one impacting the other. Even if one of control modules is broken down, the other control module will work stably.
Fresh Air Ventilation Duct Air Conditioner can control fresh air temperature between 15℃~28℃ and make people feel comfortable.
High air flow and low cost.
Equipment:
Direct Evaporative Air Conditioner
Features:
The heating and cooling efficiency of direct evaporative air conditioner are higher than common air conditioners
The energy consumption of the direct evaporative air conditioner is 40 percent lower than air cooled air conditioner and 15 percent lower than water cooled air conditioners, which achieves lower running cost.
